Part Number Hot Search : 
30201 AN79M10 BL55066 D60NF55L 274AI 0107N C5V6L MBZ5226
Product Description
Full Text Search
 

To Download STE2130S Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 STE2130S
240RGB x 320 single chip true 262K color controller/driver
Data Brief
Features


One Time Programmable (OTP) non-volatile embedded memory On chip calibration (with OTP Cells) of key configuration and gamma curve parameters. External non-volatile memory (EEPROM) allows storing key configuration parameters and gamma curve parameters.
240RGB x 320 display matrix 1382Kbits display RAM 65K and 262K color modes Partial display mode Vertical scrolling Programmable number of lines and columns allows smaller display resolutions Programmable N-line polarity inversion Selectable input interfaces: - 68000 and 8080 parallel interfaces - 3- and 4- wire SPI interface - 3-wire 9-bit serial Interface Selectable scan direction 4 programmable gamma look-up tables for gamma setting Fully integrated oscillator requires no external components Fully integrated biasing and voltage generator Designed for chip-on-glass (COG) and chipon-foil (COF) applications Logic supply voltage range from 1.5 to 1.95V High-voltage generator supply range from 2.2 to 3.6V Integrated low drop-out (LDO) voltage regulator Common electrode switch drive Cap-On-Common and Cap-on-Gate (patented) TFT structures Gate, common and source waveform timing generation digitally tunable Gate driver voltage range from -15.0 to 16.5V Source driver voltage range from 0.0 to 5.5V Common driver voltage range from -2.5 to 4.5V
Description
The STE2130S is a low power CMOS LCD controller/driver featuring extremely low current consumption. Designed to drive 240 RGB columns by 320 rows, 65K or 262K color graphics display, with amplitude modulation, the STE2130S provides all necessary functions in a single chip, including an on-chip gate driver supply, source driver supply and source reference voltage generators resulting in a minimum of externals components. A complete set of digital functions limits host controller overhead to manage complex display configurations and to transfer fast moving image data to the display RAM. STE2130S features five standard interfaces (3wire serial, 3-wire SPI, 4-wire SPI, 68000 parallel and 8080 parallel) for easy of interfacing with the host controller. The STE2130S is designed to operate with both traditional Cap-on-Common and Cap-on-Gate panels by means of a switching Common Electrode driving scheme

December 2006
Rev 1
1/4
www.st.com
4
For further information contact your local STMicroelectronics sales office.
STE2130S
Key features and benefits

Full RAM integrated, up to 262kcol Integrated LDO Fully integrated OTP for parameters setting EEPROM I/F selectable for parameters setting Up to 4 gamma curves programmable for gamma correction Integrated oscillator and charge pump reduced number of external components Low power consumption solution
Functional block diagram
Figure 1. Functional block diagram
99 - bit 3wires / 8 - -bit3&4 wires -bit 3wires / 8 bit 3&4 wires Serial Interfaces Serial Interfaces 8080 & 68K parallel 8090 & 68K parallel interfaces interfaces
E2PROM I/F
OTP Status register Control register
Instruction
decoder
Glass break chip detachment detection
Display RAM 240rgb x 320 (18 Bits)
Clocks generator
Grey levels generator Gamma correction LDO
&
COM Gate DAC High voltage generator
Source drivers
Gate drivers
Vcom drivers
2/4
STE2130S
Ordering information
Ordering information
Table 1. Order codes
Part number STE2130S Gold bumped dice Description
Revision history
Table 2.
Date 19-Dec-2006
Document revision history
Revision 1 Initial release. Changes
3/4
STE2130S
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
4/4


▲Up To Search▲   

 
Price & Availability of STE2130S

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X